홈페이지> 블로그> What is the wifi probe? wifi probe works in detail

What is the wifi probe? wifi probe works in detail

October 08, 2022
What is the wifi probe?

WiFi probe technology refers to the identification of smart phones or WiFi terminals (notebooks, tablets, etc.) with WiFi enabled near the AP (Wireless Access Point) based on WiFi detection technology. The WiFi probe can be recognized without the user accessing WiFi. User's information.

When we walk into the probe signal coverage area and our wifi device is turned on, our device can be detected by the probe, whether it is IOS or Android system can easily detect and get the device's MAC address.

WiFi detection features

● Users do not need to connect, no need to install APP;

● The phone can be detected by connecting to WiFi.

● Automatically detect the WiFi terminal identification MAC address in the area;

● Automatically record the time zone log_TIme and field strength SNR of each WiFi terminal;

● Compatible with iOS Apple and Android systems, mobile devices such as smartphones, laptops, and tablets that enable WiFi can be detected.

What is the wifi probe? wifi probe works in detail

How WiFi probes work

To gain a deeper understanding of the WiFi probe technology, first understand the network protocol used by WiFi. WiFi uses the IEEE 802.11 protocol set, which contains many sub-protocols. Among them, chronological development, mainly: (1) 802.11a, (2) 802.11b, (3) 802.11g (4) 802.11n. In network communication, data is encapsulated into frames, and a frame is a block of data in communication. However, the frame has a fixed format when it is transmitted at the data link layer. It can be transmitted without random encapsulation and packing. The size is limited. The minimum size is 46 bytes and the maximum is 1500 bytes. Therefore, we must encapsulate according to this rule. The frame structure of 802.11 below:

What is the wifi probe? wifi probe works in detail
What is the wifi probe? wifi probe works in detail

As can be seen from the above structure, the first two bytes are: frame control field.

The first 2 bits of the control field are: protocol type. Currently, this value is: 0.

1) Control frame: (ControlFrame, such as RTS frame, CTS frame, ACK frame) is used for handshake communication during the competition and forward confirmation, ending non-competition period, etc.;

2) Management frame: (ManagementFrame, for example, Beacon frame, ProbeRequest frame) is mainly used for negotiation and relationship control between STA and AP, such as association, authentication, synchronization, etc.

3) Data frame: (DataFrame, the carrier carrying the data) is used to transmit data during the contention period and non-competition period.

1, management frame

BeaconFrame: Beacon frame is a very important maintenance mechanism, mainly to announce the existence of an AP network. Regularly transmitted beacons allow the mobile WiFi device to know the existence of the network and adjust the parameters necessary to join the network. In the basic network, the AP must be responsible for sending Beacon frames. The range of the Beacon frame is the basic service area. In a basic network, all communication must pass through the access point, so the WiFi device cannot be too far away, otherwise the beacon cannot be received. The figure below is the frame format:

What is the wifi probe? wifi probe works in detail

2. Management Frame ProbeRequest: The probe request frame, the WiFi device will use the ProbeRequest frame to scan which 802.11 networks are currently in the area. The figure below is the frame format:

What is the wifi probe? wifi probe works in detail

3. Data frame:

Data data frame, when the access point wants to send a frame to the WiFi device but does not have to confirm the previously transmitted information, the standard data frame is used. The standard data frame does not ask the other party if there is data to be transmitted, so the receiver is not allowed to transmit any data. The Data-Only frame used in the contention free period is identical to the data frame used in the contention free period. After reading the above network knowledge, let's talk about how the WiFi probe works, or look at the picture first:

What is the wifi probe? wifi probe works in detail

As described in the figure, our WiFi probe is actually an AP, which periodically broadcasts a Beacon frame to its surrounding area to notify nearby WiFi devices that the AP is present (like it has been around) Shouting, I am here, everyone is coming to connect me). Our WiFi devices, mobile phones, tablets, etc., constantly send probe frames to find nearby APs. In the introduction of the probe frame, we can see that the probe frame contains the mac address of the device. When our AP receives the probe frame, it acquires the MAC address of the device, and this AP is our WIFI probe. Therefore, as long as the WiFi device is turned on in the WiFi probe coverage area, the probe can collect his MAC address.

What data can be collected by the WiFi probe?

Data can be collected:

Device MAC address;

WiFi signal strength;

WiFi signal channel;

Signal frame type.

Recording format: Probe MAC|Grab device MAC|Type of WiFi packet sent by device|Subtype|Signal strength|Timestamp

What is the wifi probe? wifi probe works in detail

Data interpretation

"Probe MAC" is the MAC address of the probe itself;

"Grab device MAC" refers to the MAC address of the transmitting device of the WiFi signal captured by the probe, generally a mobile phone;

"Signal strength" refers to the strength of the WiFi signal captured by the probe, the minimum value is "-100". Generally, the larger the value, the closer the transmitting device is to the probe;

"Type of WiFi packet sent by the device" refers to the category of the WiFi signal captured by the probe. When the value of the last digit is 0, 4, 8, respectively, the captured WiFi signal is "management" frame, " Control "frame", "data" frames;

"Timestamp" refers to the time at which the probe grabs the WiFi signal. The timestamp may be inaccurate if the probe is used within a local area network without accessing the wide area network.

What data can be combined with WiFi probe data?

The core of data application lies in the integration. How to put together the data in a single piece of data and let the data drive business develop is the issue of the present and the future. Although online big data has already experienced the baptism of the Internet, offline data still has a long way to go. So what data can the WiFi probe be combined with?

MAC data can be deeply integrated with payment data, member data, consumption data, marketing data, geographic data and online data, and multi-dimensional data integration can be combined to draw a complete user portrait, such as user's name, age, and interest preference. , consumption characteristics, past consumption records, education, etc. Based on these data combined with specific applications, this will enable offline merchants to rely on the data to release the value of the data.

문의하기

Author:

Ms. Zoe Zhong

Phone/WhatsApp:

+8618617178558

인기 상품
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

2010 년에 설립 된 Entnorson Antenna Co., Ltd는 커뮤니케이션 안테나의 연구, 개발, 판매 및 서비스에 종사하는 전문 회사입니다. Yetnorson은 2 g/3 g/4 g/wifi/TV 안테나와 다양한 RF 커넥터 및 안테나 케이블 어셈블리를 전문으로했습니다. 우리는 5 명의 엔지니어가있는 R & D 팀이 7 일 이내에 고객의 사양에 따라 프로젝트를 완료 할 수 있으며 귀하의 옵션을 위해 500 가지 이상의 현재 안테나 제품을 제공합니다. 그 동안 36 개의 제품 특허와 8 개의 상표가 있으며 ISO...
Newsletter
회사 주소
Room #101,201,301,5BLDG , No.4 of XinWuCun New Area ,Shabo community Maluan Street Pingshan District, Shenzhen ,Guangdong , China, Shenzhen, Guangdong China

Copyright © 2024 Yetnorson Antenna Co., Ltd.판권소유

Copyright © 2024 Yetnorson Antenna Co., Ltd.판권소유

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신