홈페이지> 블로그> Mining Communication Cable Identification and Length Marking Analysis

Mining Communication Cable Identification and Length Marking Analysis

November 07, 2022
Solid insulated filled cable is suitable for pipe laying in coal mine pipe network and is mainly used for pipe laying. The inner and outer surfaces of the cable core and the shielding layer are filled or poured with petroleum jelly to prevent the intrusion of moisture in the coal mine. Under the common 30~C 60~C environmental conditions in coal mines , the mechanical and electrical properties of coal mining communication cables remain unchanged. It is used for the communication lines of roadways, inclined lanes and electromechanical chambers, as well as for roadways, shafts or inclined shafts for the transmission of main signals.

Mining communication cable structure

1. Wire: Annealed bare copper wire with a copper wire diameter of 0.30, 0.42, 0.52, 0.60, 0.70, 80.90 (mm).

2. Insulating material: High-density polyethylene or polypropylene, marking the color of the insulated wire according to the full-chromatography standard.

3. Insulated pairs: Two different colored insulated wires are twisted into pairs at different pitches and the specified chromatographic combination is used to identify the pairs.

4. Communication cable core structure: One pair is used as the basic unit, and more than 25 pairs of cables are grouped by unit. Each unit is wrapped around the specified unit of the chromatography to identify different units. 100% or more pairs of cables have a 1% reserve line pair but no more than 6 pairs. The gap in the core is filled with petroleum jelly.

5, core wrap: with polyester film wrap.

6. Shielding: Copper wire shield or embossed (or not embossed) metal strips, which are wrapped outside the cable glands of the communications cable.

7, sheath: blue low density polyethylene. Double jacketed communication cables are also available.

Mine communications cable identification and length marking

The outer surface of the cable has a permanent identification mark, marking interval is not more than 1m, the content of the mark: wire diameter, the number of pairs, cable model, manufacturer's name and manufacturing code, the length of the mark is not greater than 1m marked on the outer surface, But staggered with the above mark. The mining communication cable adopts full-chromatization insulation, and the aluminum-plastic integrated sheath (that is, the longitudinal shielding aluminum tape of the cable is bonded with the sheath to form a seal sheath) has the advantages of superior electrical performance and convenient construction.

문의하기

Author:

Ms. Zoe Zhong

Phone/WhatsApp:

+8618617178558

인기 상품
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

2010 년에 설립 된 Entnorson Antenna Co., Ltd는 커뮤니케이션 안테나의 연구, 개발, 판매 및 서비스에 종사하는 전문 회사입니다. Yetnorson은 2 g/3 g/4 g/wifi/TV 안테나와 다양한 RF 커넥터 및 안테나 케이블 어셈블리를 전문으로했습니다. 우리는 5 명의 엔지니어가있는 R & D 팀이 7 일 이내에 고객의 사양에 따라 프로젝트를 완료 할 수 있으며 귀하의 옵션을 위해 500 가지 이상의 현재 안테나 제품을 제공합니다. 그 동안 36 개의 제품 특허와 8 개의 상표가 있으며 ISO...
Newsletter
회사 주소
Room #101,201,301,5BLDG , No.4 of XinWuCun New Area ,Shabo community Maluan Street Pingshan District, Shenzhen ,Guangdong , China, Shenzhen, Guangdong China

Copyright © 2024 Yetnorson Antenna Co., Ltd.판권소유

Copyright © 2024 Yetnorson Antenna Co., Ltd.판권소유

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신