홈페이지> 블로그> Externally attached rubber waterstop connector

Externally attached rubber waterstop connector

September 29, 2022
The following steps are as follows:
  
One: First, prepare the hot-vulcanized compound welding equipment needed for the rubber waterstop joints: the tools needed for the water-proof joints of the composite welder for waterstops
  
Two: Turn on the power for 30 minutes in advance to warm up the heat welding machine. The preheat temperature should reach 130 to 150°C.
  
Three: The water stop tape joints are cut neatly, and the grinding machine is used to grind the end, the width is not less than 5cm. Cutting the rubber seal joints will require thinning at the joints
  
Four: Separately cut 10cm wide raw rubber ridges and 1cm wide raw rubber ridges.
  
5: Unplug the power supply, turn off the preheating welder, and place the stop-stop joint on the floor of the welder.
  
6: Place a 1cm wide raw rubber joint strip in the middle of the joint. Then lay a 10cm wide raw rubber support strip on the polished surface of the waterstop to ensure that the width of the seam is equal on both sides. Put the raw rubber connecting strips in the middle of the seams and lay the raw rubber strips on the polished surface of the joints.
  
Seven: Close the rubber hose jointer and tighten the bolts. After turning on the power for 5 minutes, tighten the bolt again (with two people unable to move it), continue heating for 5 minutes, and turn off the power. Welding is completed. Close the rubber hose jointer, tighten the bolt, wait five minutes, tighten the bolt again, and continue heating for five minutes.

图片30.jpg

External Mounted Rubber Waterstop Construction Notes:

  

First, the externally attached rubber waterstops must not be exposed to sunlight for a long time, prevent rain, and do not come into contact with chemical substances that are highly polluting.

  

Second, in the transport and construction, to prevent damage to machinery and steel dams.

  

3. During the construction process, the externally attached rubber waterstops must be securely fixed to avoid migration during concrete pouring and ensure the correct λ placement of the waterstops in the concrete.

  

Fourth, the method of fixing rubber waterstops: use of additional steel, special fixtures, fixed wire and template fixed, etc., if you need to pierce, can only be selected in the edge of the waterstop installation area, not to damage other parts.

  

5. When the user orders the product, calculate the length of the product according to the engineering agency and design drawings. The special-shaped structure must have the drawing instructions. The water stop tape should be connected as a whole in the factory. If it is necessary to connect on site, the electric heating plate can be used for vulcanization bonding. Or cold bonding or welding methods.

  

Hengshui Yifeng Technology Co., Ltd. Main business: production, wholesale, retail and import and export of rubber water stop series, expansion water seal series, GB flexible packing, two-component sealant, polyethylene closed-cell foam board series, three yuan Ethylene-propylene rubber composite board, cement, water expansion seal ring, water expansion sealant and other engineering waterproof materials.

背贴式 (10).jpg The

문의하기

Author:

Ms. Zoe Zhong

Phone/WhatsApp:

+8618617178558

인기 상품
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

2010 년에 설립 된 Entnorson Antenna Co., Ltd는 커뮤니케이션 안테나의 연구, 개발, 판매 및 서비스에 종사하는 전문 회사입니다. Yetnorson은 2 g/3 g/4 g/wifi/TV 안테나와 다양한 RF 커넥터 및 안테나 케이블 어셈블리를 전문으로했습니다. 우리는 5 명의 엔지니어가있는 R & D 팀이 7 일 이내에 고객의 사양에 따라 프로젝트를 완료 할 수 있으며 귀하의 옵션을 위해 500 가지 이상의 현재 안테나 제품을 제공합니다. 그 동안 36 개의 제품 특허와 8 개의 상표가 있으며 ISO...
Newsletter
회사 주소
Room #101,201,301,5BLDG , No.4 of XinWuCun New Area ,Shabo community Maluan Street Pingshan District, Shenzhen ,Guangdong , China, Shenzhen, Guangdong China

Copyright © 2024 Yetnorson Antenna Co., Ltd.판권소유

Copyright © 2024 Yetnorson Antenna Co., Ltd.판권소유

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신